Drill mod for Cartek adj master???
#2
TECH Resident
iTrader: (10)
Re: Drill mod for Cartek adj master???
Yes. This should be done with any clutch (maybe not the Mcloud master, I don't have any experience with that one) The Cartek is basically a modified stock master. I toasted my Cartek in less than 4 months partially due to not doing the drill out mod.
Mark
<small>[ March 14, 2002, 02:33 PM: Message edited by: 1madss ]</small>
Mark
<small>[ March 14, 2002, 02:33 PM: Message edited by: 1madss ]</small>
#4
TECH Addict
Join Date: Nov 2001
Location: Monroe, SD
Posts: 2,956
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drill mod for Cartek adj master???
any one know how to do it, or have a link. i am lazy and dont want to search <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#6
TECH Apprentice
Thread Starter
Join Date: Nov 2001
Location: Bolingbrook, IL
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drill mod for Cartek adj master???
It sounds like Cartek has done the modification already. I was reading up on the new carteck's and it seems as if they went the next step further and modified their Master for us. The Cartek master comes with the modified hydraulics with DOT5 master with adjustable pedal rod and slave. I will do the mod if it is not done already, but just reading over the instuctions on the mod I am a little shakey as how to perform it...Thanks..Michael