BAKED

iTrader: (14)

Well after rebuilding my tranny the other day I installed my RAM HD and have been trying it out over the past couple of days. So far I love it, it's not too stiff but not too soft, it's just right IMO. I am taking it to the track this weekend with some sticky tires and the juice, I'll let you know how it does then.

Steve01SS

iTrader: (43)

PIMP! I have two of them with Billet flywheels sitting right here. It's a nice looking piece. Were installing one in my buddy's C5 this weekend.....then in my car shortly after.. hehe..

keep us posted..
thanks
Steve

BAKED

iTrader: (14)

I took it to the track yesterday and it It done great. Absolutely no problems what so ever. It even done reat on the juice.

01tam6

iTrader: (1)

Does your clutch chatter pretty bad? unless I give 1500 or more rpm mine chatters pretty bad and is not nearly as easy to drive as a stock clutch.

BAKED

iTrader: (14)

No chatter at all. It is a little stiffer than the stocker but not too bad.

Steve01SS

iTrader: (43)

Got mine installed this past weekend. So far so good.. Still breaking it in.

ThirdGenLS1

iTrader: (11)

i love mine, it chattered a little from 500-1000 miles but chatters little now. Have about 15k on it now and its still going strong, if i let the clutch out real slow it will chatter just a hair but nothing that isn't avoidable or annoying.