Deeavi

iTrader: (16)

What is the standard clutch type for the 98-02 F body cars. I am doing an A4 to 6 speed conversion and I am not sure if I have the right clutch setup. I bought the Z06 clutch/flwheel setup and I bought an adjustable Master Cylinder(pull type). I looked at the new clutch today and it looks like a push type? I also bought the 2001 model slave cylinder.

Do I need the push type Master Cylinder for the Z06 setup?

1LoudTA

iTrader: (11)

i thought it was the same

jessmansweet

93-97 pull (unconventional)...98-02 push (standard)..

Deeavi

iTrader: (16)

Thanks, You don't really see that listed anywhere, so I appreciate your answering my question. I am going to send the pull hydraulics that I bought back to Summit

I did some further checking and found that there is a special slave cylinder/release brg for the Z06 clutch setup. If anyone needs it the number is: GM #89059282

DONAIMIAN

iTrader: (18)

remember that the Z06 clutch will fit out cars, but the Z06/C5 hydraulics wont.