New Clutch
TECH Enthusiast
Joined: Jul 2005
Posts: 732
Likes: 0
From: Herndon, VA
..it's pretty hard to find cheap + good in the same clutch, especialy if you get a new flywheel, master, and slave. Here's a place to start hunting:
http://www.lmperformance.com/c/14/1.html
Personally, I like my new McLeod, but at $850+ it's not cheap. It does come with a new flywheel and adjustable master for that price.
http://www.lmperformance.com/c/14/1.html
Personally, I like my new McLeod, but at $850+ it's not cheap. It does come with a new flywheel and adjustable master for that price.
I just installed a RAM HDX and had the flywheel machined. It grips good and no chatter. We'll see how it stands up. The stock clutch went through a lot of track runs. The install woulda been easier before you did the headers and y-pipe. Now you have to take the y-pipe back off to get the transmission out.
Originally Posted by flame
I just installed a RAM HDX and had the flywheel machined. It grips good and no chatter. We'll see how it stands up. The stock clutch went through a lot of track runs. The install woulda been easier before you did the headers and y-pipe. Now you have to take the y-pipe back off to get the transmission out.
yeah it would have but it was fine then, but probably ONCE every 20 times i drive it, i get a RUB/Grind in one of the gears, or even when im just at a stop and put it in neutral.
the y-pipe is welded too so thats gonna suck.
how much for the ram hdx?
