Raptor Shift Light
#1
Thread Starter
12 Second Club
iTrader: (27)
Joined: Feb 2006
Posts: 606
Likes: 0
From: Texas....thank God.
Raptor Shift Light
First I would like to say thanks for all the pics of yall's lights installed. I think that the defrost vent is the coolest idea, ever! Anyway, I purchased my light used and it only has about 1.5 ft of wiring to it. It has three wires: Red, Green, and Black.
So, what goes where!? Im assuming that Black is ground, Red power(batt.) adn the green taps into the tach wire(on ECM).
Thanks in advance.
So, what goes where!? Im assuming that Black is ground, Red power(batt.) adn the green taps into the tach wire(on ECM).
Thanks in advance.
#2
You might need more wire. It depends on where you wanna run your wires.
Here is a link for the install, it's super helpful and makes the install a breeze.
http://www.installuniversity.com/ins...ht_install.htm
Here is a link for the install, it's super helpful and makes the install a breeze.
http://www.installuniversity.com/ins...ht_install.htm