Please help me on this set up
Thread Starter
Launching!
Joined: Feb 2005
Posts: 269
Likes: 0
From: MI
Please help me on this set up I know its prolly been beat to death but....I'm a nub and never messed with a clutch....and I'm very interested in the ls2 fly wheel/ls7 clutch set up....
So what EXACTLy is EVEYTHING I need??
I know the clutch and flywheel....but that about the pressure plate,which one? what about the slave cylinder?(what even is that?) and what about the master cylinder?? D I need to upgrade these?? or adjust them?? If so how do I know when their adjusted right??
I need some teaching here?? sorry for the nub **** but...
So what EXACTLy is EVEYTHING I need??
I know the clutch and flywheel....but that about the pressure plate,which one? what about the slave cylinder?(what even is that?) and what about the master cylinder?? D I need to upgrade these?? or adjust them?? If so how do I know when their adjusted right??
I need some teaching here?? sorry for the nub **** but...
If you get the LS7 clutch/LS2 flywheel package it should come with LS2 flywheel, LS7 pressure plate, LS7 disc, & Throw out bearing. Then you need to get a 01-02' slave & new pilot bearing. Thats should be about it.
I'd probably reccomend upgrading the master & slave cylinders with the new install, and doing the drill mod. I never got around to doing that when my car was t56, but I did drive a car that had those mods. Makes shifting a whole lot nicer!
