clutch install torque
Thread Starter
Launching!
iTrader: (3)
Joined: Apr 2004
Posts: 219
Likes: 0
From: Hurlburt Field, FL
clutch install torque anyone know what the specs are for the torque on the ram powergrip HD?? i cant find my instructions.. and I want to make sure i torque it correctly.
no.. rams site does not list it.
no.. rams site does not list it.
Last edited by LordOfChaos; Jun 24, 2006 at 07:47 PM.
Thread Starter
Launching!
iTrader: (3)
Joined: Apr 2004
Posts: 219
Likes: 0
From: Hurlburt Field, FL
come on guys. this is really important, i'm puttin the clutch in sunday (today), all I need is HOW MUCH tq i'm supposed to install it with. i know procedures etc.
I don't know Ram specs, but stock should be close. Make sure to use red loctite:
Engine Flywheel Bolts (First Pass) 15 lb ft
Engine Flywheel Bolts (Second Pass) 37 lb ft
Engine Flywheel Bolts (Final Pass) 74 lb ft
Clutch Pressure Plate Bolt (6-Speed) 52 lb ft
Engine Flywheel Bolts (First Pass) 15 lb ft
Engine Flywheel Bolts (Second Pass) 37 lb ft
Engine Flywheel Bolts (Final Pass) 74 lb ft
Clutch Pressure Plate Bolt (6-Speed) 52 lb ft
