Pro 5.0 noise
05-20-2002, 09:02 PM
#1
Teching In
Thread Starter
Join Date: May 2002
Location: Illinois
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Pro 5.0 noise When I am at 4500 rpm my shifter makes a lot of noise. it sounds like a your holding a bell and shaking it really fast. It is really annoying and would like it to go away now.
05-20-2002, 09:07 PM
#2
TECH Resident
iTrader: (56)
Join Date: Jan 2002
Location: Bartlett, IL
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pro 5.0 noise Maybe if you ask it nicely to quiet down then it will <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Seriously, all aftermarket shifters are a little louder than stock, although they shouldnt be making rediculously loud noises. I'd take it apart again and see if maybe something isnt lined up right.
Seriously, all aftermarket shifters are a little louder than stock, although they shouldnt be making rediculously loud noises. I'd take it apart again and see if maybe something isnt lined up right.
05-21-2002, 01:07 PM
#4
On The Tree
iTrader: (1)
Join Date: Feb 2002
Location: San Jose, CA
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pro 5.0 noise Get a piece of Dynamate or some type of sound deadening material that is real sticky....Rammat works real good. Wrap it around the stick/shifter interface where the two bolts are and squeeze it to fill in any gaps. It worked really well on my Pro5.0 w/ Lou's and you cant even tell you did it with everything put together.
