master problem?
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Mar 2006
Location: las vegas
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
master problem?
i have a 98 m6 Z28 camaro and just put in a centerforce dual friction clutch with upgraded slave. after getting everything back together and bleeding it. the clutch engages at the top of the pedal. is there anything else i can try to get the clutch to engage closer to the floor besides buying the mcloude adj. mast?
#2
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
Get a stocker made adjustable or make yours adjustable.
But the proper adjustment will only move the pedal so much.
The clutch itself is the primary factor in determining the release/engagment point.
But the proper adjustment will only move the pedal so much.
The clutch itself is the primary factor in determining the release/engagment point.