Cartek Clutch?
Thread Starter
TECH Resident
Joined: Dec 2001
Posts: 977
Likes: 0
From: Hawaii
Cartek Clutch? Aloha gang, I smoked my stocker @ 21,00mi this weekend so I went ahead and got myself the Cartek. I was wondering if anyone had any input (good or bad) about this clutch? I'll be installing it myself next weekend.......Thanks, Aloha Dave! <img border="0" alt="[chug]" title="" src="graemlins/gr_chug.gif" />
<small>[ July 09, 2002, 03:04 AM: Message edited by: Diesel ]</small>
<small>[ July 09, 2002, 03:04 AM: Message edited by: Diesel ]</small>
Re: Cartek Clutch? It has worked great for me! Especially since I have one of the heaviest cars and am cutting some of the best 60' times.
Daily-drivability with it is excellent also, no complaints at all here.
Tony
Daily-drivability with it is excellent also, no complaints at all here.
Tony
Thread Starter
TECH Resident
Joined: Dec 2001
Posts: 977
Likes: 0
From: Hawaii
Re: Cartek Clutch? Thanks Tony, for mow my SS is a daily driver so it's good to hear that I'm not going to hate this clutch on the street. Any install tips? <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
Re: Cartek Clutch? It uses the stock steel flywheel, so have it resurfaced or buy a new one. You have to use a centerpunch to knock the stock locating pins out of the flywheel since they are not required for the Cartek.
Make sure you use Loc-Tite on the bolts that hold the flywheel to the crank.
Everything else is just like any other clutch.
Tony
Make sure you use Loc-Tite on the bolts that hold the flywheel to the crank.
Everything else is just like any other clutch.
Tony
