Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Pulling tranny Help ASAP

Thread Tools
 
Search this Thread
 
Old 03-04-2007 | 08:48 PM
  #1  
blue98Z's Avatar
Thread Starter
11 Second Club
iTrader: (29)
 
Joined: May 2006
Posts: 1,933
Likes: 1
From: The Bayou State
Default Pulling tranny Help ASAP

Pulling tranny from bellhousing. Is there only six bolts holding it then eight on the bellhousing? Need help ASAP.
Old 03-04-2007 | 10:07 PM
  #2  
03 BUSA's Avatar
10 Second Club
iTrader: (25)
 
Joined: Dec 2004
Posts: 2,554
Likes: 1
From: Kannapolis, NC
Default

I believe there are 8 bolts holding the trans to the bellhousing. I just put mine back in yesterday.
Old 03-04-2007 | 10:36 PM
  #3  
blue98Z's Avatar
Thread Starter
11 Second Club
iTrader: (29)
 
Joined: May 2006
Posts: 1,933
Likes: 1
From: The Bayou State
Default

You are correct. I located the upper two right after I posted this. Got it out now.




All times are GMT -5. The time now is 07:24 AM.