pro 5.0 problems
#1
Staging Lane
Thread Starter
Join Date: Aug 2007
Location: laguna niguel Ca
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
its sooo hard to shift into gear.. i have a m6 obviously..
When i installed it i used a gasket i custom made im wondering if that has something to do with it. its a paper gasket.
sometimes its slides right in sometimes its hard to get into gear its not like it grinds or anything i just feel like im going to break somethingthis morning when it was cold it gave me probs as it warmed up it go easier
When i installed it i used a gasket i custom made im wondering if that has something to do with it. its a paper gasket.
sometimes its slides right in sometimes its hard to get into gear its not like it grinds or anything i just feel like im going to break somethingthis morning when it was cold it gave me probs as it warmed up it go easier
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
a lot of shifters, not only the pro 5.0 have this problem. it just has to do with the trans being cold. back when i had an m6 - had the 5.0 as well - i always let the car warm up for a bit (yes, even in the summer) so i never noticed the problem personally.
#5
Staging Lane
Thread Starter
Join Date: Aug 2007
Location: laguna niguel Ca
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yea i went and took my shifter off and removed the gasket and re installed it.. it feels great! i did let it warm up and it felt great! sooo yea thanks!!!!!!!! Fluid feels