two man bleeding

Reply Subscribe

Thread Tools

Search this Thread

Oct 12, 2007 | 03:35 PM

jdizzle

Thread Starter

Teching In

Joined: Aug 2006

Posts: 10

Likes: 0

From: california

two man bleeding

we bleed the clutch no more air is coming out, but the clutch is still really springy...its not giving resistance like it used to. what do i have to do?

Oct 12, 2007 | 04:52 PM

purdueranger

10 Second Club

iTrader: (11)

Joined: Apr 2006

Posts: 858

Likes: 0

From: Indy, IN

open, push, hold, close, repeat. I did this and the clutch has never felt better.

Oct 13, 2007 | 09:30 AM

Gilbert@Ace Racing

FormerVendor

Joined: Oct 2006

Posts: 3,123

Likes: 3

From: D-F/W

It can be very frustrating trying to bleed one of these systems. After we install new hydraulics or even open the system for a clutch install we bleed the system, let it sit for a couple of hours then do it again. Then we keep the car overnight to hit it one more time just to ensure that there is not going to be a problem... been bitten before with a very spongy pedal after a good test drive and delivering the car!

Stay with it and you'll get it. Call me today if you need some advice!

g