clutch master help
Thread Starter
Registered User
Joined: Oct 2007
Posts: 1
Likes: 0
From: Gilbert AZ
clutch master help So I just picked my goat up from the dealer after having the clutch master cylinder replaced because of the plastic push rod breaking.
I got about 6 miles away from the dealership and it starting clicking again, so I knew it was coming off and about to break. I pulled over and was able to use a Zip-tie to sug it up. I contacted a GM parts department, and they say there is no clip/pin to hold it on. Its just suppose to click into place.
I had a centerfoce clutch put in the car over a year ago, and this problem is just now starting in the last few weeks.
I did a search and did not come up with anything.
Any help would be great.
I got about 6 miles away from the dealership and it starting clicking again, so I knew it was coming off and about to break. I pulled over and was able to use a Zip-tie to sug it up. I contacted a GM parts department, and they say there is no clip/pin to hold it on. Its just suppose to click into place.
I had a centerfoce clutch put in the car over a year ago, and this problem is just now starting in the last few weeks.
I did a search and did not come up with anything.
Any help would be great.
