Reverse Lockout Electrical Plug?
03-26-2008 | 03:09 PM
#1
Thread Starter
Joined: Jun 2006
Posts: 1,051
Likes: 0
From: Grand Forks, North Dakota
Reverse Lockout Electrical Plug? Hey guys, sorry for the question but i cant find which plug it is thats the reverse lockout.
What are the color of the two wires going to this plug?(I need the 12V src for my 4l80e harness)
I know its on the same circuit as the 02 sensor, its btwn two that i can see.
Any input?
What are the color of the two wires going to this plug?(I need the 12V src for my 4l80e harness)
I know its on the same circuit as the 02 sensor, its btwn two that i can see.
Any input?
03-26-2008 | 03:48 PM
#2
I believe it is a green wire from the PCM, and a pink wire for the power source in the O2 sensor harness.
There is a factory wiring schematic in the A4-M6 swap section that should have you covered.
There is a factory wiring schematic in the A4-M6 swap section that should have you covered.
Last edited by Coy; 03-26-2008 at 03:57 PM.
