Slave Bad?
#1
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Dec 2007
Location: Fort Collins, Colorado Springs
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Slave Bad?
so my clutch pedal went to the floor yesterday and never came back up also the clutch is not disengaged so i poped the hood today and the fill for the clutch was empty so im wondering if the slave is bad or what would make it run out of fluid like that? also is there a difference in the slave cyl for 98 trans ams compared to the 02 trans ams?
#4
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Dec 2007
Location: Fort Collins, Colorado Springs
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
so i tried to fill up the res and bleed the clutch and im getting fluid out but the pedal does not come back up and it feels like there is no pressure to it at all, so could this be the master or the slave?
#6
TECH Regular
Join Date: Jun 2005
Location: Leominster Massachusetts
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
definitely the slave if the fluid is coming from the bell housing, and the 01+ hydraulics are better. so when you buy a new slave get an 01+ (even though i am pretty sure that is all they make now)