Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Need Help Quick!

Thread Tools
 
Search this Thread
 
Old Aug 8, 2003 | 09:33 PM
  #1  
BriGuy's Avatar
Thread Starter
Launching!
20 Year Member
 
Joined: Jun 2002
Posts: 286
Likes: 0
From: Abilene, Tx
Default Need Help Quick!

Today I was getting ready to go home from work when I went out to my car and pushed the clutch in to start the car. Okay nothing out of the oridinary until I pushed the clutch in and heard a snap. I was able to get the car home and when I got it home I looked up under the dash area and noticed that half of my clutch return spring had broken. It does not look like a difficult fix, but I have seen some things be very decieving. Is this an easy fix? If so, where can I buy a return spring at?
Any help would be greatly appreciated!
Reply
Old Aug 9, 2003 | 06:24 PM
  #2  
BriGuy's Avatar
Thread Starter
Launching!
20 Year Member
 
Joined: Jun 2002
Posts: 286
Likes: 0
From: Abilene, Tx
Default Re: Need Help Quick!

TTT Anyone? Please!
Reply
Old Aug 10, 2003 | 12:29 PM
  #3  
Sleepy383SS's Avatar
Staging Lane
 
Joined: Aug 2003
Posts: 69
Likes: 0
From: Motor City
Default Re: Need Help Quick!

Going to have to order it from a dealer. Its a very simple job, as with anything, take your time and dont force anything. You shold be able to figure i out on your own but if not, I believe a chiltons manual has a diagram.
Reply
Old Aug 10, 2003 | 03:48 PM
  #4  
BriGuy's Avatar
Thread Starter
Launching!
20 Year Member
 
Joined: Jun 2002
Posts: 286
Likes: 0
From: Abilene, Tx
Default Re: Need Help Quick!

Thanks!
Reply




All times are GMT -5. The time now is 01:55 AM.