Clutch pedal question
Thread Starter
TECH Enthusiast
Joined: Jan 2003
Posts: 634
Likes: 0
From: VA
Clutch pedal question I am doing a conversion from v6 auto to ls1/t56. I mounted the pedals looks like the they only go in one way. Gas and brake pedal are perfect but with the slave all the way extended i cant get the clutch pedal to come all the way up. I am stumped on how to fix the promblem. The slave seems like it is to short. Any suggestions.
Thanks
Thanks
Re: Clutch pedal question I have done this conversion a few times. If you are using the factory petals ETC... slave it will bolt right up the wholes are already marked on the fire wall so drilling them should be a no brainer and as far as the petal goes they should all be very close to one another. The clutch usually sticks out a little farther @ 1/2" or so. make sure your petals are not bent I had some that were they worked but had problems with the clutch not wanting to disengauge fully. PM me if you have any more questions I can answer them for sure.
