Description:

I am selling as a package a PSI Conversions Harness, Model Number HAR-1014 and GM ECU. This harness is for a 24X, DBW (truck 8 pin throttle body), 4L60E transmission, EV1 Injectors. It was originally set up for MAF but was converted for speed density tune. An IAT sensor connector has been added. The wires are still in the loom to convert it back to a MAF setup. Included in the sale is the TAC box, the original gas pedal and coil harness for the system. Everything, except the PSI Harness, were from a 2006 chevy truck with a 5.3L. The harness connectors for the ECU are Green and Blue. This harness is also setup for cruise control, I never hooked it up to try it.
I also have a set of EV1 to EV 6 adapter. The gas pedal was modified to fit my 1965 Chevy C-10 truck. I have to cut and off set the pedal a little bit.
The computer had been programmed with a start up tune for a 5.3 with a speed density tune for a 66MM turbo, 80# injectors, BTR stage 1 turbo cam and a 2500 stall converter. I did have the running and drove it this past summer with the start up tune. I only drove the truck a hand full of time due to the weather was so hot and also never had a chance to take it to the tuner for Dyno tuning. Speed Inc in Schaumburg Illinois did the tuning. I also have a mount for the ECU.
Asking $450 + shipping.

If you have any questions please let me know.