Trickflow CNC 245's
For SaleEngine - Internals
-
Price
$2,300
- Location Peoria, IL, 61614, USA
- Condition New
Description:
Long story short.
I had these heads milled down to 64cc and some work done by BTR/TEA. My shortblock came back with the deck cut down in the 9.224" range, so ultimately, that combination made fitting an intake on this motor nearly impossible.... so.... I guess that's just the way it goes sometimes. Lesson learned.
Heads are new. They were bolted to the motor, but never ran. BTR/TEA did some work and they have BTR springs, valves, PM guide's so you can use stock rockers, etc...
I've got about $3,000 in the heads, which is pretty standard affair.
Wanting to get $2,300 shipped back out of them, as I think that's pretty fair for what they are.
Also would consider trading for a set of heads that would work for my build such as a TFS 235 or similar that has not been cut.
I'm not on here a ton, so I would probably respond faster to text/phone call. 309-360-0955 if interested.
Thanks
