Beck intake,Zoomie headers/ARP SAM pedigree heads,jesel,
Aug 3, 2019, 10:27 AM | Replies: 27 | Views: 8689
-
Price
$1,200
- Location Slippery Rock, PA, 16057, USA
Description:
Zoomie headers Stainless steel. $200.00
Parting out" tomtheroofer" top end from years ago. Updating top end. Was a 421 built by Judson Massingill director if SAM tech. Doing updates on car to return it to the track.
Ported and really worked 243 heads,1.550 tripple springs, Jessel 1.9 rockers 2.08 longer valves to take the .836 lift cam. Beck sheet metal intake to match. Bad to the max set up sum 10 years ago. Engine was pulled for an sound it was making and discovered that a lifter was bad. Started to ride on the lobe. Will need cam ground, new lifter replaced and rebuilt. Can text pics 724 421 6042 will sell whole top end. Beck intake was 2500.00 a lone. Will sell the whole top end cam,lifters,tapered push rods,heads valve covers, bare intake for 2800.00
Car runs 9.5x's N/A all day when maintained properly.
Look it up! We have a lot of LS parts. We have been building and running LS power since 2000
Thanks
JC
Last edited by lsxlowtech; Feb 4, 2020 at 05:46 AM.
Reply
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
Joined: Apr 2008
Posts: 546
Likes: 5
From: Slipperyrock,pa
Heads complete, Jesel rockers,cam lifters,push rods,.800+ lift cam.moroso valve covers. 2500.00 shipped.
Last edited by lsxlowtech; Oct 23, 2019 at 06:52 PM.
Thread Starter
Joined: Apr 2008
Posts: 546
Likes: 5
From: Slipperyrock,pa
Thread Starter
Joined: Apr 2008
Posts: 546
Likes: 5
From: Slipperyrock,pa
97-03 ARP head bolts nice condition. Wrong for my block. 90.00 shipped in 48. Long and short.
Still have 243 heads with Jesel adjustable rockers. 1.550 springs good for .850 lift. 2.08 intake valves. Hand ported. Dyno proven HP . Moroso valve covers. Can have cam , push rods and lifters too. Lifter needs replaced and cam ground. Beck intake as well
Still have 243 heads with Jesel adjustable rockers. 1.550 springs good for .850 lift. 2.08 intake valves. Hand ported. Dyno proven HP . Moroso valve covers. Can have cam , push rods and lifters too. Lifter needs replaced and cam ground. Beck intake as well
Thread Starter
Joined: Apr 2008
Posts: 546
Likes: 5
From: Slipperyrock,pa
Have a good back up 5.3L 2010 block 40k miles. Was taken apart, bearings clearance and rings gapped for boost. Degree cam Can hear run on a run on stand.ARP head bolts 1200.00
4.8L rotating assembly clearances set rings gapped heads done with competition valve job. In a aluminum block. So aluminum 4.8L is correct. I made it. ARP head bolts. Degree cam. Can hear run. 1500.00
4.8L rotating assembly clearances set rings gapped heads done with competition valve job. In a aluminum block. So aluminum 4.8L is correct. I made it. ARP head bolts. Degree cam. Can hear run. 1500.00