Description:

Hello, I am in the middle of a bracket car build with a good friend of mine... Here are some of the following parts I need... I have cash/PayPal and also a good amount of interesting trades as well...

ENGINE
-GM LS3 Offset IN. Rocker Arms & Stands (Billet stands??)
-CHE or SmithBro's Bronze / Bushed Truniun Kit (NEW)
-Fbody spacing dampener preferably ATI or maybe Fluidamper. Stock or 10% U.D. at most NON A/C
-Holley/Quickfuel/Pro/VDL ect. ect. 750-850(800 preferred) square bore 4150 mechanical secondary double pumper
-Crank Scraper GenIII 6L
-Vacuum pump for crank case venting system
-12-15' of -8AN fuel line and fittings
-small assortment of-10AN fittings
-Holley electric fuel pump (Carb system)
-Nice Fuel Log
-holley carb billet throttle bracket
-SFI Flexplate and spacer (02 genIII LQ4 based 408 too TH350)
-Trans Scatter Shield
-UMI Aluminum Solid LSX block side mounts (P/N 2323?)
-UMI or similar stock spring style 82-92 tubular A-Arms
-Global West derlin/steel A-arm bushings
-Manual GM steering Box
-Adj Wonder bar
-Rear LCA'S & Panhard (moly/mild.. end must be double adj with rod ends or roto/derlin ends)
-front 90/10 maybe 70/30 82-92 struts
-rear budget adj shocks (comp 3-ways?)
-Autometer oil temp/oil prs./water temp/fuel level/voltmeter & tach
-weld or similar 15x10" w/ 5.5" B.S. & front skinnys. .

-Drop spindle's 82-92
-modified spindles for C5/LS1 or better brake systems?
-2"-3" cowl fiberglass pin on cheap light weight hood (89 bird)
-Rear drag bar set up
-Rear bag for RR spring
-MOROSO Trick springs???


Possibly a link bar hyd. Roller for GenIII LS.
Possibly Hill LS3 IN valves and SS Ferrea/Manley EX.

Sooooo much i need, sorry for the VERY long winded post lol... If you made it this far I appreciate your time. I have SBC/LSX performance & OEM parts, aluminum 5.3, 82-02 OEM parts (some performance) NASCAR open wheel modified parts, 2 68 Corvettes in pieces... All sorts of things for trade and also good o'll CASH or PayPal.

Thank you very much for your time, any help or advice is greatly appreciappreciated,
Adam Bainbridge
(716)235-3159