Custom 102mm Intake
06-29-2020, 08:45 AM | Replies: 5 | Views: 1925
Description:
This was made based off a BBK intake but had been ported and ceramic coated with 102mmm added on the bottom is a solid welded piece. I bought this from the shop doing the work on my car but am going direct port nitrous in time and did not want to drill into this piece. This has 0 miles on it was only mocked in place. Will need a split fitting in the rear for brake booster and HVAC vac line and you delete the EVAP Purge. This was gonna be on a high boost car but before install blew motor and owner lost interest is how I came into possession on this. That last photo is from
the Shop Coppola Motorsports our of Malta NY he had it made
Comes with new FAST intake manifold gaskets and new intake bolts.
this will fit on LS1 or LS2
$750OBO
Last edited by 04goat350; 06-29-2020 at 08:59 AM.
Reply
07-29-2020, 08:55 AM
#2
Bump on this, now included with this is a set of fore ls1/ls6 fuel fails ( just needed hoses and hardware) map extension harness, and all fittings for vacuum lines. Also a new set of intake bolts, also a aluminum clip for the map just drill the hole in the clip and add the correct screw to hold down to front of intkae. You would only need to remove the purge and plug and tune out. This will fit ls2 also
750 now shipped obo
750 now shipped obo
