Description:

It's ready for the drag strip, it's ready for the road track, and it's ready for the grocery store. This has been a daily driver for me almost 5 months now, it's the real deal. Did you build your car to have it sit in your garage for 6 days a week? I didn't. If I gotta go somewhere, this baby gets me there.
DELIVERY AVAILABLE
If you are insterested and cannot come pick it up, I will deliver it to you. That's right, I will DRIVE this car to you no matter where you are just to prove it's the real thing.
If you have real insterest, PM me for details on delivery
This car will be up for sale until mid to late October. After that, I'll just put it back under the knife and do the next set of upgrades to it, likely keeping it forever.
MODS include

Suspension:
BMR adjustable torque arm
https://www.bmrsuspension.com/?page=...315&superpro=0
BMR Torque arm relocation transmission crossmember
https://www.bmrsuspension.com/?page=...327&superpro=0
BMR Front sway bar
https://www.bmrsuspension.com/?page=...296&superpro=0
UMI Tubular turbo K member
https://www.umiperformance.com/home/...-k-member-ls1/
Spohn adjustable panhard bar
https://www.spohn.net/shop/1982-1992...UaAogwEALw_wcB
Spohn rear sway bar
https://www.spohn.net/shop/1998-2002...-Rear-Bar.html
Spohn Lower Control arms rear
https://www.spohn.net/shop/1998-2002...-Bushings.html
Spohn Upper and lower control arms front
https://www.spohn.net/shop/1998-2002...er-A-Arms.html
and
https://www.spohn.net/shop/1998-2002...-Bushings.html
Viking double adjustable coil overs on all 4 corners
https://www.bmrsuspension.com/index....productid=1428
and
https://automafiaracing.com/products...nt=52449378759
SLP weld in subframe
https://www.coloradospeed.com/subfra...bird-p-91.html

Engine:
Built LS1, capable of 7200 RPM only 4800 miles
Stock crank, polished
Stock block
LS6 Intake
317 heads
BBK 80mm TB
https://www.bbkperformance.com/gm-ls...nditioned.html
Lunati Voodoo H-beam Rods
https://www.lunatipower.com/4340-h-b...ls6-6-125.html
Engine Pro Nitro Black Valves
https://sandiegoengineparts.com/prod...lves-01-3200-8
Comp Cams Dual Valve Springs, 1.320 OD .690 Lift
https://www.cnc-motorsports.com/comp...e-springs.html
Comp Cam Turbo Cam (shelf)
https://www.compcams.com/lsr-remote-...en-iii-iv.html
ARP Bolts and Studs
https://www.xtremediesel.com/arp-250...0aAv_tEALw_wcB
Wiseco Pistons and rings
https://www.tickperformance.com/wise...art-k398x3905/
Walbro 450 in tank
https://walbrofuelpumps.com/450lph-w...0267.html.html
60lb Injectors
Steelbraided lines
Areomotive inline FPR
https://www.rallysportdirect.com/par...0aAhJBEALw_wcB
Holly Fuel Rails
Elite E2 catch can PCV system with clean side separator
http://www.eliteengineeringusa.com/e2-catch-can/
SLP Strut tower brace

Turbo Setup:
On3 ac delete kit hot side w/ On3 76mm turbo
https://www.on3performance.com/shop/...em-ac-deleted/
Manual Boost controller
Custom cold side
Rev9 4in intercooler
https://rev9power.com/cooling/interc...tercooler.html
Downpipe terminates under the passenger seat

DriveTrain:
6spd - T-56 Shell with TR-6060 inards. Swapped and built by TickPerformance, fully loaded with upgraded shifter forks and syncros
Moster LT1-SC Twin Disc
https://monsterclutches.com/1998-200...t-fbody-clutch
Clutch Masters adjustable master cylinder
Custom all aluminum drivershaft with greaseless ujoints
Hawks Motorsports Short throw
https://www.hawksmotorsports.com/93-...throw-shifter/
Rear end has strange 35 spline axels, not sure about the brand for gearset or housing, but it's a 3.73 set. Been told it's bulletproof

Extras:
On3 Vertical Radiator Kit
https://www.on3performance.com/shop/...-radiator-kit/
Maradyne Mach Two Series Electric Fans
https://www.summitracing.com/parts/mar-mm22ks
Turn One PS pump with Billet pulley
https://turnonesteering.com/product/...rade-pump-hp1/
Custom guague's Mounted by shifter and into vent pockets on dash
Oil Temp, A/FR, Boost, Fuel Pressure
Over 3k in stero Equipment
Alpine Single Din Deck
2x 12" Kicker Subs
4x 3 way speakers with tweeters mounted into the door panels
2 amps, one for the 4 speakers, one for the 2 subs
Standalone capacitor for energy management and efficeincy
Fiberglass SS good
Z06 wheels
All newly upholstered seats, front and rear installed.
Dash is perfect, no cracks
Not installed but included in the sale is a tick performance adjustable clutch master cylinder and the ENTIRE AC system. I had planned to put it back in
Body is 9/10. There are some things with the bumper cover that aren't great, as I was attempting the mods myself. It's functional, but could look better.

The money is in the power, not the style.