Description:

Description:

this is sold

CNC Parts List 3.9 Stroker kit / Engine



 K1 Balanced 392 LQ4 Stroker KIT, 9.0:1 JE Pistons, Forged (cnc-motorsports.com)

THIS IS FROM THE CMC MOTORSPORTS WEB SITE



 CNC-Motorsports is please to offer K1 Technology rotating assembly kits. These kits are designed for performance application builds up to 1200 horsepower. Kit fits GEN III 6.0L Vortec 6000, LQ4 LQ9, GEN IV 6.0L LS2 L76 L98 L77 LY6 L96

• GM GEN III LS2 LQ9 LQ4 6.0L Balanced Stroker rotating assembly kit features

• K1 Technology 4340 forged steel crankshaft, 3.900 Stroke

• K1 Technology 4340 forged steel H-Beam rods with 7/16" ARP 2000 rod bolts

• JE FSR 2618 forged pistons, .150 wall wrist pins (*Fits all 12 or 15 degree LS cylinder heads) 1.165 C/H

• JE Premium pro seal performance piston rings, 1.2mm 1.5mm 3.0mm

• High performance H series main and rod bearings

• This rotating assembly kit has been Internal balanced in-house by CNC-Motorsports

• Compression Ratio with 64cc head 9.3:1

• Compression Ratio with 68cc head 9.0:1

• Compression Ratio with 70cc head 8.8:1
  
  Wrist pin upgraded for applications past 800 horsepower

THE BLOCK IS A 2004 LQ4 

2004 LQ4 Block

PREPARED BY SILVAS AUTOMACHINE SHOP FRESNO CA.

Bored .010 Over

Block Decked

New Cam Bearings installed

New Timing Chain & Gears

BTR STG II Turbo cam

New LS7 Lifters

New LS2 lifter Holders

Block drilled and tapped for timing chain Tensioner ( included )

Front TC Cover W/Bolts Gasket & seal

Rear Main Seal Cover W/Bolts W/ Gasket & Seal

Fbody oil pan / Dipstick / Tube Brace / W/gasket / W/Barbell

 Ls3 Heads Speedmaster ( 64 cc )

W/Valves

660 lift valve Springs

Rockers w/ Upgrade Trunion Bearings

Cylinder Head Studs




 SUBTRACT Fbody oil pan / Dipstick / Tube Brace / W/gasket / W/Barbell SUBTRACT $200.00

Add LS3 Intake manifold / Fuel Rails / LS3 1500cc SnakeEater Injectors ADD $700.00


Will be posting pictures of all parts soon


Contact  need4speed069@yahoo.com

Text or call 559-408-4189

SHIPPING IS NOT INCLUDED

PAYPAL IS ACCEPTED

ENGINE SHIPPING WT IS 400LB

WILL BE SHIPPED IN A 3 X 3 X 3 WOODEN CRATE