Description:

Listing my Moser 12 bolt axle assembly for sale. Was purchased by previous owner of my vehicle. Going by their documentation, it has been on vehicle for ~ 40,000 miles. 

**Price reduced to $1200, open to offers. I can't travel right now. Buyer will need to meet me at Gloucester Township Municipal Building 1261 Chews Landing Rd, Clementon, NJ 08021. 

Once price negotiated, payment will be via paypal please.

Details are below but feel free to ask any questions regarding details that may not have been addressed.

More Details:
- 33 spline axles, machined for 4 channel abs tone rings, will need to supply your own rings to keep 4 channel ABS/ASR
- Uses pressed on bearings. Will need to supply a new set of bearings from Moser and have them pressed on after installing your own brake backing plates. The inner races from the bearings are still on axle, need to be pressed off prior to installing new bearings.
- Moser aluminum girdle cover
- Eaton clutch style limited slip differential
- Spohn LCA relocation mounts are welded onto assembly- welds are solid
- Pinion yoke uses a 1350 U joint. The yoke has girdle caps that aren't pictured but will be included.
- 3.73 richmond gear set currently installed, pattern in attachments and backlash was .007 when installed
- I have 4.11 gear set that I removed from this differential that I will include with the sale
- I have U bolts and mount for aftermarket sway bars on the axle assembly that worked with my rear Hotchkis sway bar
- I needed to move axle vent location from near the center section due to mounts for my watts link. Fittings current location can be seen in the pictures. Plug was threaded into prior location
- in very respectable cosmetic shape. Minimal effort needed to put a fresh coat of paint on
- other item you will need to provide-> the mounts for the brake lines/parking brake