Description:

As stated, lots of new and used parts here. All prices are PLUS shipping unless picked up locally. May be willing to meet within a reasonable distance for some parts. Payment by Paypal only. Buyer to cover fees or send via friends and family. Check back often as I will be adding more parts as I sift through all my stuff and determine what I no longer need. Thanks for looking.

Melling 10294 LOW Volume Oil Pump: These pumps will work on any LS block but were designed/are recommended for aftermarket blocks with priority main oiling. I used this for about 10 street miles to help in diagnosing an oil pressure drop that turned out to not be pump related. $125.00

Morel 5254 LS Solid Lifter Set: BRAND NEW. These were brought to me by a customer for use in his build. However the bent-style link bar will not clear the upper "6th" head bolt boss in the LSX block. His loss is your gain. $650

ICT Billet F-body Low Mount Alternator Bracket: BRAND NEW. $75.00

ICT Billet D585 Coil Bracket Set: BRAND NEW. $30.00

Wiseco Forged Flat Top Pistons: 4.155 bore, 4.00in stroke. Pistons are used and include all 8 oil ring support rails and BRAND NEW wrist pins. Only need rings and spriro-locks. I removed these pistons from my personal 434 when lowering the compression to go Procharged. SOLD!

Motion Raceworks SBC/LS Engine Diaper: This diaper is intended for rear sump pans and set ups with a motor plate as it does not have cut outs for motor mounts. BRAND NEW. Never installed this and now I'm going dry sump. SOLD!

Aeromotive Carbureted (3-20psi) Bypass Fuel Pressure Regulator: Capable of regulating high pressure EFI pumps down to carb'd pressures. I used this with an A1000 pump. I'm including the pictured ORB AN fittings (8AN inlet, outlet and return and a second 6AN outlet). SOLD!

Autometer 2 5/8 Sport Comp Mechanical Fuel Pressure Gauge: 0-15psi. Including mounting cup only. Braided AN feedline in picture is no longer included. SOLD!

Autometer 2 5/8 Sport Comp Mechanical Nitrous Pressure Gauge: 0-2000psi. Including mounting cup and braided AN feedline. These items are normally sold separately from the gauge. SOLD!

Summit Racing 6AN Fuel Filter (SUM-230123B): Including a brand new 10 micron replacement filter element and a mounting bracket. SOLD!

GM 4.125 LSX 58x Cranshaft. This was taken out of my customers LSX 454R crate motor when piston availability for 4.125 strokes was an issue. These cranks work with an 8 bolt flexplate. SOLD!

Prosystems 1000CFM 4150 Carburetor: Includes pictured NOS microswitch, 8AN fuel feed line and Aeromotive fuel pressure gauge. SOLD!

GM F-body Oil Pan "Kit": Includes oil pan, riveted gasket, bolts, windage tray, pickup tube, dipstick and dipstick tube. ALL BRAND NEW. Used only for mock up. Some rust staining showing on the pan gasket surface from the iron mock up block. SOLD!

GZ Motorsports LSX Super Pro Vacuum Pump Kit: Includes pump with 12AN fittings and vacuum regulator, tensioner/drive pulley, pump pulley, mounting brackets on F-body spacing and overflow/puke tank (not shown). Still installed on my car but will remove for a serious buyer as I am going dry sump this winter and will no long need this. SOLD!

Edelbrock Nitrous Progressive Controller: Went Procharger and Dominator ECU. No longer needed. SOLD!

Edelbrock Super Victor LS7 Carbureted Intake: 4150 flange. Includes port o-ring gaskets. SOLD!

MSD 6012 Ignition Box: This is the older MSD box for carbureted 58x LS motors. Includes the complete harness, communication cable and ignition curve pills (not pictured). SOLD!