365" LS2 w/ 821 LS3 heads - complete longblock - NEW
For SaleEngine - Complete
-
Price
$8,250
- Location St. Louis, MO, 63129, USA
- Condition New
Description:
Selling this LS2/LS3 365" engine, ALL NEW (minus block and head castings) which were completely machined - details below. $8250.00
Start up video
https://www.dropbox.com/scl/fi/i6z86...=yvuw5v74&dl=0
Exhaust note
https://www.dropbox.com/scl/fi/sb39n...=ipkfpnkh&dl=0
It would make a nice NA hot rod engine or a great mild boosted engine, something with a smaller centrifugal or turbo or a LSA supercharger.
GM 6.0L 4.005" bore LS2 aluminum block, torque plate honed, PCD surface mill, decks squared, to main tunnel, media blasted, ultrasonically cleaned, NEW cam bearings installed, tested for cracks, align honed with ARP studs, super low mile block
NEW GM LS3 3.622" stroke crank 58T std./std., tig reluctor to crank
NEW Summit/ K1 6.125" H-Beam 4340 rods w/ ARP 2000 bolts
NEW Wiseco K398X05 forged 2618 alloy pistons w/ valve reliefs - 1.2, 1.2, 3.0MM GFX piston rings, Gas nitride steel top, Napier 2nd, FT -3.2cc 2 valve reliefs, 10:1 with 68cc LS3 heads
Balanced rotating assembly within 1/2 gram
NEW ARP Main Stud kit 234-5608
NEW ARP Cam bolt kit
NEW Clevite Performance main bearings
NEW Clevite Performance rod bearings
NEW Durabond cam bearings
GM LS3 0821 cylinder heads (ultra low mile crate engine take -offs), NEW BTR .660 valve springs, Tiatanium retainers, PCD surfaced, Competition valve job, set up installed heights, Assemble with NEW seals
NEW LS3 Comp Cams Stage 4 hydraulic roller camshaft
GM LS3 rocker arms and stands
NEW Smith Bros. bronze rocker trunion bearing kit installed
BTR LS9 6.2 7-layer MLS head gaskets
NEW JP Motion LS3 4X billet timing gear set 5627T
NEW GM LS7 lifter 12499225
NEW Melling 10295 oil pump w/ COPO spring
NEW ARP head stud set 234-4317
NEW GM timing chain damper
NEW Comp Cams 7.375" 11/32" 4130 pushrods
Melling block plug and dowel kit
GM lower end gasket set
NEW Summit LS3 valley cover
NEW GM LS3 front cover
NEW GM LS rear seal cover
NEW Holley style (Amazon) F-Body (302-3) oil pan, pick up, GM windage tray
- Perfect for: 1967-1969 Camaro/Firebird, 1968-1974 Nova/Apollo/Ventura/Omega, 1982-1992 F-body, 1978-1987 G-body, and 1964-1972 A-body applications. Also 1979-2004 Mustang and 1979-1986 Capri Fox bodies
NEW GM F-Body harmonic balancer and bolt
longblock assembly w/ buildsheet - set all oil bearing clearances, assemble rods and pistons, file-fit piston rings, degree camshaft, set valvetrain geometry, install all covers, clean and inspect all components, clean bag for pick up
*This engine has been started on a stand to verify oil pressure, leaks, temperature, etc. - have video.
*Will trade for Magnuson 2650 Hot Rod set up (LSA/LS3)
Can ship at buyer's expense after FULL payment received.