Mast Black Label LS3 heads and top end
For SaleEngine - Internals
-
Price
$3,500• Trade
- Location Rochester, NY, 14586, USA
- Condition Used
Description:
Very nice Mast LS3 top end. Everything is in excellent condition and this setup was all used together (and a proven performer!). Mileage is approximately 4k.
- Mast Black Label LS3 heads, 255cc, 69cc chambers, 4.000" (+) bore
- Stainless valves
- BTR .660" platinum valve springs (new)
- Crower shaft mount rockers w/all hardware ($2300 new)
- Comp Cams 7741 pushrods (used with Johnson 2116 lifters)
- Precision Metalcraft sheet metal intake manifold (newly powder coated)
- Fuel rails w/ new fittings and crossover line
- Custom manifold vacuum lines and fittings
- Polished LS2 throttle body
- Katech aluminum valve covers (newly powder coated) w/-10an breather fittings w/all hardware
- Bosch 2200cc injectors (just cleaned and flow tested)
The intake and valve covers were just powder coated gloss black and absolutely beautiful. The intake is truly a work of art. It's the low rise version that clears the stock hood if used on a C6. There are a couple small marks in the valve covers but nothing bad. The heads are 6-bolt; however, two of the bosses were clearanced for the previous exhaust and these were only used on a 4-bolt block. You can either use as-is, mill the bosses off all together, or weld up the clearanced area if you're using a 6-bolt set up. Also, the valve cover insert says "Lethal Performance". Katech sells new blank inserts for $12 if you'd like to replace them.
New price on this stuff is around $12k.
-Complete top end (everything listed above) $7500 $6500 $6000
-Heads w/Crower shaft mount rockers $3800 $3500
Open to possible trades (up or down).
Willing to split the package up if someone first buys the heads and shaftmount.
Last edited by JasonShort; Apr 19, 2026 at 01:24 PM.
Trending Topics
The Best V8 Stories One Small Block at Time








