wheel help?
#1
Teching In
Thread Starter
Join Date: Mar 2009
Location: springfield,mo
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a 95z would like 2 run draglites! Wanna run a 315by 45or50 in the rear and some kind of streetable skinny in front! any help on wheel size and backspacing!!!!! Thanks
#3
12 Second Club
iTrader: (6)
Join Date: Aug 2006
Location: Bradley IL
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You are going to need Atleast an 10.5 - 11" wide wheel, and I dont believe there are any such things as streetable skinnies... dont quote me on that but thats what I think. Backspacing on a stock length fbody is 7.5. If you have a stock car, you want a 15" x11" draglite w/ 7.5 backspace, but unless you are planning on running atleast 10's I wouldnt recommend that much tire. Hope this helps... I am no expert, but I noticed nobody posted anything, and a little information is better than none
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
#5
TECH Fanatic
iTrader: (23)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
for that much power I'd think a 28x10.5 stiff sidewall M/T slick would be a good choice or a 275/60 et street radial with whatever skinny combo you want up front. probably the metric 165r15 tires up front or if bias ply then 26x7.50 eight ply m/t sportsman pros.
15x10 with 7.5bs would be the rear size. the front would be 15x3.5 with a spacer probably. You'll need longer ARP studs all around as well as new lug nuts also.
15x10 with 7.5bs would be the rear size. the front would be 15x3.5 with a spacer probably. You'll need longer ARP studs all around as well as new lug nuts also.