Kansas machine shops?
Thread Starter
TECH Apprentice
iTrader: (1)
Joined: Dec 2007
Posts: 307
Likes: 0
From: ft. riley, ks
Kansas machine shops? Looking for a reputable shop in KS to port LT1 heads, and possibly do a rebuild. Only place i could find was CHS in Wellington, but cant find a website or contact info. I'm at Ft. Riley, but wouldnt mind an hour or two drive for a good shop. thanks.
Staging Lane
Joined: Sep 2010
Posts: 59
Likes: 0
I know a couple of shops in my town that do great work.
1. Mast Street Machines
They did the work on my dad and I 302 for our 65 mustang project, they balanced and blueprinted it and everything else.
2. Schroer Speed Shop in strong city
Its a buddy of mines shop, he did all the work on his S281 Mustang and is puttin down somewhere around 450rwhp, so he knows alot about what he is doin.
Hope this helps out a bit
1. Mast Street Machines
They did the work on my dad and I 302 for our 65 mustang project, they balanced and blueprinted it and everything else.
2. Schroer Speed Shop in strong city
Its a buddy of mines shop, he did all the work on his S281 Mustang and is puttin down somewhere around 450rwhp, so he knows alot about what he is doin.
Hope this helps out a bit
If you have any luck, let me know! I am in FT Riley too, and looking to "freshen" up my lt1 stroker and heads this winter. I drove buy some shop down in Salina once I thought of calling, looks like they built race motors... but i'd feel more comfortable with an "LT1 farmiliar guy" What car do you drive? I have a artic white z28 with an ls1 front clip... work in 1st bde
