ds98formula

iTrader: (3)

I am looking for a shop in the Joliet/Chicago area. I am planning on taking my heads off to replace the lifters. So wile they are off I am wanting to get a good valve job done and possibly some milling. Anyone know of a good shop around to take them to?

NHRAFORMULA00

iTrader: (2)

PM sent

ds98formula

iTrader: (3)

Thank you

willizm

iTrader: (10)

Try PER Race Engines in Plainfield. They are off of RT59 and 119th behind the Binny's. Great shop.

NHRAFORMULA00

iTrader: (2)

per is known too over charge

ds98formula

iTrader: (3)

Thanks for all the reply's after talking to both shops it is just as cheap to pick up some 243's instead. Valve job, surfacing, and cleaning is just about $400. I can find 243's for that. Have them surfaced for $100 and be up some power. Of course I will have to source valve covers too but still not too much more for the upgrade and room to grow in the future.

NHRAFORMULA00

iTrader: (2)

You can have your heads ported by Texas Speed and get a whole lot more H.P. out of them than just getting a set of 243s. 10-15 h.p. versus 35-40.

ds98formula

iTrader: (3)

Yeah I was looking into that . I was thinking of having AI do them. I am also looking into PRC ls6 heads. Price is about the same for AI high compression 219 port program and PRC stage 1 heads. $5 difference between the two. I keep going back and forth between the two