Winter Progress
I'm over in Shelby Twp near Rochester. I'll let you know when I get it all together and we'll meet up for some friendly runs, or in my case *** whoopins to let me know my place lol. Thanks for all the friendly helping hands guys, I'll let you all know if I run into problems.
I definatly wanna go to the track sometime in May or April if my car is running good I'm just psyched to go and get some numbers but I'll definatly let everyone know, the more the better. As for the install I got some free time today between work and school and removed almost all of the intake part, its slow progress but I still Have to paint my FAST ntake manifold and get a few more little things so I'm not in a big hurry.
Don't worry at the pace you are going you will be ready to go by the end of the track season! 
Anyways, no need to rush, just take your time and do it right the first time!
Good luck!
Anyways, no need to rush, just take your time and do it right the first time!
Good luck!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Yes I realize my engine bay is horrid and I will be throughly cleaning my entire car after this get finished I'm ashamed it looks this way and I apologize. Oh and by the way I know I'm working slow but its tough to find time when you work 10 hours of the day and go to class another 4. You wanna help on your free time I'd be more than happy. 
Yeah I was just throwin it up there, I have the weekend after the superbowl planned to do the entire swap but figured I'd start when I got free time. I have a couple of guys comming from different boards to help me out so it should be done then.
Not over the weekend because I was busier than Hell but heres what I did in the little time I had today.
I also removed the stock y-pipe and the manifold will come off tomorrow, maybe the heads as well.
I also removed the stock y-pipe and the manifold will come off tomorrow, maybe the heads as well.
Heads are off now and the block and bolt holes have been cleaned I just gotta remove the crank bolt and the pulley and get at the cam and start swapping it all out. Then its new parts in and reassembly.