Cam Install this weekend, Dyno Next Weekend
Thread Starter
Scammer Alert!
iTrader: (9)
Joined: Apr 2007
Posts: 461
Likes: 0
From: Richmond, Illinois
Cam Install this weekend, Dyno Next Weekend Well pretty excited these next two weeks, as this weekend i am getting my tsp 224-224/581/581 112 lsa and under drive pulley installed, then next weekend the 27th i have a dyno tune setup with Mike @ Straightline, cant wait to have this new found power, im not expecting anything cause i dont want to be dissappointed, but what does everyone think ill put down?
Trending Topics
you did set a date I feel based off our emails but...if you needed to cancel I understand being Straightline can do it on a Sat for you.
From: Ricky Boling [mailto:rickester332211@hotmail.com]
Sent: Tuesday, October 16, 2007 10:50 AM
To: Larry
Subject: RE: dyno tune
Hi, Larry, I really appreciate you taking the time to do this for me, i live kinda far away or else i would just come in during normal business hours, Here is the info on my car.
1999 Pontiac Firebird, 6 Speed, LS1, roughly 66,000 miles, as far as modifications,
-Ported and polished throttle body, LS6 intake, Pacesetter longtube headers with off road y pipe, slp loudmouth catback, i deleted AIR and EGR when doing the ls6 intake so my check engine light is on, so you know. I dont know if you need this but i just had an ls7 clutch kit installed with an ls2 flywheel, and new slave cylinder aswell.
The cam i am installing this weekend, is a Texas Speed 224/224/581/581/ on a 112lsa, with comp 918 springs, and the ASP Underdrive Pulley with new ac and serpentine belts. I will drop the keys in an envelope, would you like me to place a check in the envelope as well? If so who do i make it out to and for how much? I most likely would be picking the car up after business hours, which is why i ask if youd like the check.
If you could fax that release form over "RE: Ricky" to 847-XXX-XXX
Again, Thank You Very much Larry, my cell is 815-XXX-XX99 if you have any questions. Ricky
--------------------------------------------------------------------------------
From: larry@ls1speed.com
To: rickester332211@hotmail.com
Subject: RE: dyno tune
Date: Tue, 16 Oct 2007 09:47:25 -0500
Yes…want to do the 22nd ?
I would need all the info on the car and you could use the on-line form under services on our home page.
Please have keys in an envelope with all your info
We will need a Dyno Release form signed and maybe you could do that Sat ? or I can fax you one to sign ?
-----Original Message-----
From: Ricky Boling [mailto:rickester332211@hotmail.com]
Sent: Tuesday, October 16, 2007 9:38 AM
To: Larry
Subject: RE: dyno tune
Larry, do you have a key drop box, so i could drop it off on a Sunday night so youll have it for Monday Morning?
From: Ricky Boling [mailto:rickester332211@hotmail.com]
Sent: Tuesday, October 16, 2007 10:50 AM
To: Larry
Subject: RE: dyno tune
Hi, Larry, I really appreciate you taking the time to do this for me, i live kinda far away or else i would just come in during normal business hours, Here is the info on my car.
1999 Pontiac Firebird, 6 Speed, LS1, roughly 66,000 miles, as far as modifications,
-Ported and polished throttle body, LS6 intake, Pacesetter longtube headers with off road y pipe, slp loudmouth catback, i deleted AIR and EGR when doing the ls6 intake so my check engine light is on, so you know. I dont know if you need this but i just had an ls7 clutch kit installed with an ls2 flywheel, and new slave cylinder aswell.
The cam i am installing this weekend, is a Texas Speed 224/224/581/581/ on a 112lsa, with comp 918 springs, and the ASP Underdrive Pulley with new ac and serpentine belts. I will drop the keys in an envelope, would you like me to place a check in the envelope as well? If so who do i make it out to and for how much? I most likely would be picking the car up after business hours, which is why i ask if youd like the check.
If you could fax that release form over "RE: Ricky" to 847-XXX-XXX
Again, Thank You Very much Larry, my cell is 815-XXX-XX99 if you have any questions. Ricky
--------------------------------------------------------------------------------
From: larry@ls1speed.com
To: rickester332211@hotmail.com
Subject: RE: dyno tune
Date: Tue, 16 Oct 2007 09:47:25 -0500
Yes…want to do the 22nd ?
I would need all the info on the car and you could use the on-line form under services on our home page.
Please have keys in an envelope with all your info
We will need a Dyno Release form signed and maybe you could do that Sat ? or I can fax you one to sign ?
-----Original Message-----
From: Ricky Boling [mailto:rickester332211@hotmail.com]
Sent: Tuesday, October 16, 2007 9:38 AM
To: Larry
Subject: RE: dyno tune
Larry, do you have a key drop box, so i could drop it off on a Sunday night so youll have it for Monday Morning?
Last edited by LS1 SPEED; Oct 18, 2007 at 05:26 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
On another note I put down 393hp and 370TQ with a tune from Mike! with the mods in my SIG(click on it for the tuning videos)
they are good guyz,
but so are the guyz at Speedinc most of my parts have been through them.
they are good guyz,
but so are the guyz at Speedinc most of my parts have been through them.
1st off dropping keys off in an envelope is not considered an appointment, so why would he need to cancel??
and 2nd off, I'm jealous. thats the exact cam I was planning on doing this winter. I wanna hear it after you get it installed
and 2nd off, I'm jealous. thats the exact cam I was planning on doing this winter. I wanna hear it after you get it installed
RARE99...how does that not seem like an appointment.
I asked for all his info: it was provided
Ricky asked about drop box info and which form if payment would work as well as asked to fax dyno release form to be signed.
I can care less if he is going to Mike @ Straightline, but it's the fact that he did basically set a date and didn't cancel. This would have been a simple 2 second email.
The last email he seemed confused as to a question I had inquired about and that was it.
I am sure Mike will take care of him and as noted I understand him going there as they can work with his schedule. We only offer tuning M-F and that didn't work well with his work schedule.
I asked for all his info: it was provided
Ricky asked about drop box info and which form if payment would work as well as asked to fax dyno release form to be signed.
I can care less if he is going to Mike @ Straightline, but it's the fact that he did basically set a date and didn't cancel. This would have been a simple 2 second email.
The last email he seemed confused as to a question I had inquired about and that was it.
I am sure Mike will take care of him and as noted I understand him going there as they can work with his schedule. We only offer tuning M-F and that didn't work well with his work schedule.
Last edited by LS1 SPEED; Oct 18, 2007 at 09:32 PM.
yea but his last email said he could drop it off sunday night not that he was going to. nothing was for sure so thats how i don't think thats an apointment. it was just a miscommunication. what ever happend to good ol'e fashoned phone calls?
he was comunicating via email....why would I call him ?
I asked if he wanted the 22nd and then he went onto providing mod info, contact info, requested dyno sheet, etc
sorry you don't see it as we did
I am fine with leaving it at a miscommunication... have a nice night.
I asked if he wanted the 22nd and then he went onto providing mod info, contact info, requested dyno sheet, etc
sorry you don't see it as we did
I am fine with leaving it at a miscommunication... have a nice night.
Thread Starter
Scammer Alert!
iTrader: (9)
Joined: Apr 2007
Posts: 461
Likes: 0
From: Richmond, Illinois
Larry, no disrespect, i should have called or even a simple email, obviously you understand, i mean either way i am driving almost 2 hours to either place so with work i wouldnt make it to either m-f, again no hard feelings, and i do appreciate the time you did put in to help me, +1 to you for that
Sounds like an appointment to me as well, when they are expecting to work on his car at a given time, and scheduling in an alloted amount of time, thats an appointment. Tim
Thread Starter
Scammer Alert!
iTrader: (9)
Joined: Apr 2007
Posts: 461
Likes: 0
From: Richmond, Illinois
Hey i apologized, i dont exactly see it as being an appointment, as in a pm or two after that i also stated the cam may not be done by the 22 so it may have to wait a little bit, no biggie though, Sean whats up man, after i get it tuned i may just swing by your place so you can check it out