Local Exhaust work needed
Thread Starter
Teching In
Joined: Apr 2008
Posts: 2
Likes: 0
Local Exhaust work needed Hey guys, im located in naperville, il and i just purchased two Flowmaster Super 44 mufflers and i need them welded onto the axle back pipes. i have a set of pipes with the mufflers cutoff and straight pipes welded in place. What i need to have done is have the straight pipes cut off, and the flowmasters welded in place. I have attached pics below. If anybody knows of a good local shop, or if anybody is a good welder than can handle this please let me know your prices.
i need this:
To be welded in place of the straight pipe. (dis regard the top muffler) The only thing to look out for is, im not sure if there is enough pipe near the connecting point. a small 2.5 inch pipe may need to be welded in to make the muffler set up long enough to reach the hangers.
and finally it needs to looks like this. having the muffler 2.5' offset i believe.
any direction would be greatly appreciated. thanks guys. This is for an 06 GTO.
i need this:
To be welded in place of the straight pipe. (dis regard the top muffler) The only thing to look out for is, im not sure if there is enough pipe near the connecting point. a small 2.5 inch pipe may need to be welded in to make the muffler set up long enough to reach the hangers.
and finally it needs to looks like this. having the muffler 2.5' offset i believe.
any direction would be greatly appreciated. thanks guys. This is for an 06 GTO.
