TTP Project Car "Running on Empty" Video
TTP Project Car "Running on Empty" Video Running on Empty
Bone Stock suspension, 3560lb car + driver.
Put together a clip a little bit ago. My partner, George, beats on a bunch of cars in the video. The street racing clips are vs. a Cartek C5 LS6 Stage 2 X Package car.
The 10.7 pass you see is on a 75 shot of juice. The other track times (11.1x) is all N/A motor. There was no nitrous used in the street racing portion either.
Look for new videos and times within a few weeks on the new motor.
- Matt Sorian
Bone Stock suspension, 3560lb car + driver.
Put together a clip a little bit ago. My partner, George, beats on a bunch of cars in the video. The street racing clips are vs. a Cartek C5 LS6 Stage 2 X Package car.
The 10.7 pass you see is on a 75 shot of juice. The other track times (11.1x) is all N/A motor. There was no nitrous used in the street racing portion either.
Look for new videos and times within a few weeks on the new motor.
- Matt Sorian
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Brent: This was on the old cam and heads package before George did extensive porting/polishing to finish up the CNC job and a valve job on the heads (They had stock valves). We have done some extensive modifications over the last 8 months since the first motor grenaded. We don't feel like getting into all the dyno number hype, so we're going to bring it out and we'll let the E/T do the talking. Remember this car still weighs in 400+ lbs heavier than yours.
- Matt
- Matt
Last edited by TTPMatt; Jan 30, 2004 at 02:47 AM.
Originally Posted by brent eb02
IT TAKES A 75 SHOT TO RUN 10.7 ??? 
Teching In
Joined: Aug 2002
Posts: 13
Likes: 0
From: New Jersey
Originally Posted by brent eb02
IT TAKES A 75 SHOT TO RUN 10.7 ???
Why do you have to turn this into a pissing match? What blatant disrespect.
Why do you have to turn this into a pissing match? What blatant disrespect.
These runs were made over a year ago, before *a lot* heads/cam cars were in the 10's. Obviously George's car was running better than the competitor's at the time (As seen numerous times in the vid). It was in a mild CNC ported ls6 head, stock valves, and the ASA cam.
Pendragon: We were just posting a video up of some street racing. I didn't need Brent to shove his nose into my thread but since he did I'm not going to let him attack us and not speak my mind.
Anyways, we'll have some more video clips hopefully next weekend
- Matt
If u wanna say someone was starting **** just look at HOW the post was represented.
Quote from Matt...
Put together a clip a little bit ago. My partner, George, beats on a bunch of cars in the video. (The street racing clips are vs. a Cartek C5 LS6 Stage 2 X Package car.)
The 10.7 pass you see is on a 75 shot of juice. The other track times (11.1x) is all N/A motor. (There was no nitrous used in the street racing portion either.)
Look I dont wanna get into a pissing match but IMO this is taking a shot at Cartek,Nothing more but everybody breaks ***** once in a while
But IMO to say a ASA cam w/1.8 rockers/BIG 250CC ported LS6 heads milled .050/TP4400 verter is mild is also rediculous Matt.Thats a stout setup PERIOD but I do agree George's car is still 3500lbs and you cant argue with that guys,his car ran very well...
Quote from Matt...
Put together a clip a little bit ago. My partner, George, beats on a bunch of cars in the video. (The street racing clips are vs. a Cartek C5 LS6 Stage 2 X Package car.)
The 10.7 pass you see is on a 75 shot of juice. The other track times (11.1x) is all N/A motor. (There was no nitrous used in the street racing portion either.)
Look I dont wanna get into a pissing match but IMO this is taking a shot at Cartek,Nothing more but everybody breaks ***** once in a while
But IMO to say a ASA cam w/1.8 rockers/BIG 250CC ported LS6 heads milled .050/TP4400 verter is mild is also rediculous Matt.Thats a stout setup PERIOD but I do agree George's car is still 3500lbs and you cant argue with that guys,his car ran very well...
Last edited by JS; Jan 30, 2004 at 01:11 PM.
Originally Posted by JS
If u wanna say someone was starting **** just look at HOW the post was represented.
Quote from Matt...
Put together a clip a little bit ago. My partner, George, beats on a bunch of cars in the video. (The street racing clips are vs. a Cartek C5 LS6 Stage 2 X Package car.)
The 10.7 pass you see is on a 75 shot of juice. The other track times (11.1x) is all N/A motor. (There was no nitrous used in the street racing portion either.)
Look I dont wanna get into a pissing match but IMO this is taking a shot at Cartek,Nothing more but everybody breaks ***** once in a while
But IMO to say a ASA cam w/1.8 rockers/BIG 250CC ported LS6 heads milled .050/TP4400 verter is mild is also rediculous Matt.Thats a stout setup PERIOD but I do agree George's car is still 3500lbs and you cant argue with that guys,his car ran very well...
Quote from Matt...
Put together a clip a little bit ago. My partner, George, beats on a bunch of cars in the video. (The street racing clips are vs. a Cartek C5 LS6 Stage 2 X Package car.)
The 10.7 pass you see is on a 75 shot of juice. The other track times (11.1x) is all N/A motor. (There was no nitrous used in the street racing portion either.)
Look I dont wanna get into a pissing match but IMO this is taking a shot at Cartek,Nothing more but everybody breaks ***** once in a while
But IMO to say a ASA cam w/1.8 rockers/BIG 250CC ported LS6 heads milled .050/TP4400 verter is mild is also rediculous Matt.Thats a stout setup PERIOD but I do agree George's car is still 3500lbs and you cant argue with that guys,his car ran very well...
thanks
george
