random TT GTO vids...
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
random TT GTO vids... Just a couple of random vids of the 05 stock motor(fast 90) twin turbo 6 speed goat. Car made 550wheel and went 11.50@128mph on a off idle launch on street tires,..not drag radials. Kit is custom, @ 10psi...schweitzer turbos with 60-1 turbine wheels and MP covers-mods to turbos done by MIKETURBO custom tune by Johan@diablospot.
http://youtu.be/xtgJZx1iWxE
http://youtu.be/xtgJZx1iWxE
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
for whatever reason, atleast on MY screen, it won't show vids....but if you click on the top of each one,..it'll direct link you to the vids.
Nuttin to crazy though.
Nuttin to crazy though.
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Weird right?
thanks on the goat. Ment to be a stealthy DD.
Cars actually pretty smooth as long as your in control. It spins pretty bad on the street but, sure is a blast lol.
Yea mang. It's all together....did all the latest mods, blah blah blah to it...just put a triple disc clutch in last weekend....ended up having a problem with it,..so, I am at a stalemate right now,...It does run...it's just that I may have to take driveline apart again briefly,,,...to work something out shim wise.
What I want to do to the car:
start, and finish all of my vacuum lines-in aluminum, and all Fragola fittings...no more rubber/nylon/pushlock hose setups. I wanna clean up engine bay so it is easier for me to diag/mod/work on, on the fly. I also wanna incorporate either a traction control system, or an AMS1000, when I am doing the hard lines.
That,..some interior stuff, roll cage,..wider rear fenders...change wheel offsets in rears...lol,..the list goes on. So, I am pretty much, never done. Here's a not to long ago vid of it running, with the new aluminum catback I had made by a good friend.
http://youtu.be/fAtV7m9bNLQ
The exhaust...
Aluminum, Carbon Fiber and everything V banded from the turbos back...3"(dp's and mid pipes are mild steel)
and the clutter...all functional but,..can't stand it.
I have the PRI show this upcoming week, then I have an F1X C6 to complete for a good friend..a wedding to go on,...argh....no time. My car is really kicking my ***. Also did fuel system mods last weekend and this to my fuel cells/tanks...endless. Hoping to have the clutch sorted out soon enough.
thanks on the goat. Ment to be a stealthy DD.
Cars actually pretty smooth as long as your in control. It spins pretty bad on the street but, sure is a blast lol.Yea mang. It's all together....did all the latest mods, blah blah blah to it...just put a triple disc clutch in last weekend....ended up having a problem with it,..so, I am at a stalemate right now,...It does run...it's just that I may have to take driveline apart again briefly,,,...to work something out shim wise.
What I want to do to the car:
start, and finish all of my vacuum lines-in aluminum, and all Fragola fittings...no more rubber/nylon/pushlock hose setups. I wanna clean up engine bay so it is easier for me to diag/mod/work on, on the fly. I also wanna incorporate either a traction control system, or an AMS1000, when I am doing the hard lines.
That,..some interior stuff, roll cage,..wider rear fenders...change wheel offsets in rears...lol,..the list goes on. So, I am pretty much, never done. Here's a not to long ago vid of it running, with the new aluminum catback I had made by a good friend.
http://youtu.be/fAtV7m9bNLQ
The exhaust...
Aluminum, Carbon Fiber and everything V banded from the turbos back...3"(dp's and mid pipes are mild steel)
and the clutter...all functional but,..can't stand it.
I have the PRI show this upcoming week, then I have an F1X C6 to complete for a good friend..a wedding to go on,...argh....no time. My car is really kicking my ***. Also did fuel system mods last weekend and this to my fuel cells/tanks...endless. Hoping to have the clutch sorted out soon enough.
TECH Junkie
Joined: Oct 2009
Posts: 3,551
Likes: 2
From: Rutherford, North Carolina
Both cars sound and look nasty OP. Great work on both and I feel you on the cleaning up of the engine bay on the Vette. Nothing beats seeing just the motor and turbos and nothing else in my opinion.
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
