JY 5.3 RX-7 Traps 155...
Thread Starter
Joined: May 2011
Posts: 8,478
Likes: 1,022
From: Wichita, KS
JY 5.3 RX-7 Traps 155... Street legal cruiser at the drag strip.
JY stock 5.3 with china studs and an S475 turbo.
Should all be in 1080p.
Baby wheelie...
Few good 9.2x passes at 150+ . Still need to iron out the 60'. 8 second slips soon to come.
[IMG]
JY stock 5.3 with china studs and an S475 turbo.
Should all be in 1080p.
Baby wheelie...
Few good 9.2x passes at 150+ . Still need to iron out the 60'. 8 second slips soon to come.
[IMG]
Last edited by Forcefed86; Jun 28, 2014 at 11:34 AM.
Thread Starter
Joined: May 2011
Posts: 8,478
Likes: 1,022
From: Wichita, KS
Strapped the front end down and played with the ladder bars a bit. Bars were setup neutral without driver previously. Now I have them setup neutral with me in the car. (slip fit FWD mount bolt on pass side bar with driver.)
Seems to launch pretty straight. Ithink with a some fine tuning on the bars and loosening up the straps a bit I'll get my 1.3x's back. I managed solid 1.40-1.44 60's all night. Kinda boring now just hooks and goes!
60' 1.43
1/8 5.89 @121.49
1/4 154.27
60' 1.40
1/8 5.84 @ 122.6
1/4 9.01 @ 155.4
Seems to launch pretty straight. Ithink with a some fine tuning on the bars and loosening up the straps a bit I'll get my 1.3x's back. I managed solid 1.40-1.44 60's all night. Kinda boring now just hooks and goes!
60' 1.43
1/8 5.89 @121.49
1/4 154.27
60' 1.40
1/8 5.84 @ 122.6
1/4 9.01 @ 155.4
