marc_w

Anyone got any?

I heard two or three a while back, but it sounded like the idle speeds were much higher than what the cam really needed.

I'd like to hear a clip that lets the little guy lope.

Thanks.

RaNsOm

iTrader: (2)

mine isnt a TR220, but its close. B1 specs are 221/221 .558/.558 114lsa with the stock idle speed.

http://home.comcast.net/~ernestworrell/idlerev.mpg

marc_w

That sounds AWESOME.

Is that an A4, or M6?

Do you know what the advertised duration of the B1 is? (is that the Lunati ground cam?)

Mike's02Z28M6

Do you have LT's w/ true duals turned down before the axle? You got a lot of bumbity-bump out of that little cam

RaNsOm

iTrader: (2)

lol, thanks guys.

Marc, yes its the original Lunati grind, I believe the adv. dur. is 280*. Car is an M6

Mike, my exhaust consists of MAC midlengths, offroad MAC ypipe (2.5") and cutout.

heres another video through the SLP catback.
http://home.comcast.net/~ernestworrell/catback.mpg

marc_w

I can't get over how good that sounds.

That's how a cammed motor SHOULD sound at startup.... p***ed off that you woke it up.

I can't believe that's on a 800rpm idle.

camaro98z28

I have a TR 220/220 cam and it sounds bad ***. I also have true duals and the car is loud too with a good LOPE

Pimpium57

iTrader: (104)

Wanna bring this ttt......Does anyone have a clip of a TR220 that you could pass off as stock?

camaro98z28

I dont have one but my old cam 220 sounded pretty nice. you will like it