Two of many kick @SS h-town rides
TECH Addict
Joined: Jul 2002
Posts: 2,906
Likes: 0
From: Somewhere I Belong
Originally Posted by DJ's99SS
You are correct...I'm no longer running the large K&N that was in front of the IC. Didn't help spraying the FMIC as the car spun the tires/clutch on every pull. The air temp inside the shop was 115 degrees!
I did a total of 4 pulls. The first two pulls we made without the "extra" sauce on the side and cooling the FMIC the car made 870 RWHP spinning the tires/clutch. Adding the 100 shot and cooling the FMIC on the last 2 pulls it made 880 RWHP also spinning the tires/clutch. So with a good dual-disc and some traction it should be in the 4 digits...Not bad for a true "street" car with A/C that I can drive anywhere I wanna go...
I did a total of 4 pulls. The first two pulls we made without the "extra" sauce on the side and cooling the FMIC the car made 870 RWHP spinning the tires/clutch. Adding the 100 shot and cooling the FMIC on the last 2 pulls it made 880 RWHP also spinning the tires/clutch. So with a good dual-disc and some traction it should be in the 4 digits...Not bad for a true "street" car with A/C that I can drive anywhere I wanna go...
peace
Originally Posted by bad95killer
Congrats DJ & it's time for a Textralia Clutch buddy
peace
peace
Thanks to my buddies for helpin' me out!!!!!
Originally Posted by The Gentlemen
no disrespect but again with the usable powerband......
badass cars nonetheless...
badass cars nonetheless...
Originally Posted by DJ's99SS
Is 650 RWHP @ 3500rpms or 750 RWHP @ 4200rpms a usable powerband?
here is one of his graphs
he is in red.
Last edited by Tiago; Aug 3, 2006 at 03:51 PM.
Thread Starter
TECH Senior Member
Joined: Apr 2004
Posts: 6,955
Likes: 0
From: Houston / University of Texas, Austin
Originally Posted by Tiago
BRUTALITY!!!!
here is one of his graphs
he is in red.
here is one of his graphs
he is in red.
hell tiago... dont forget to mention that is your dyno line in the green
Houston > *
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Originally Posted by DJ's99SS
You are correct...I'm no longer running the large K&N that was in front of the IC. Didn't help spraying the FMIC as the car spun the tires/clutch on every pull. The air temp inside the shop was 115 degrees!
I did a total of 4 pulls. The first two pulls we made without the "extra" sauce on the side and cooling the FMIC the car made 870 RWHP spinning the tires/clutch. Adding the 100 shot and cooling the FMIC on the last 2 pulls it made 880 RWHP also spinning the tires/clutch. So with a good dual-disc and some traction it should be in the 4 digits...Not bad for a true "street" car with A/C that I can drive anywhere I wanna go...
I did a total of 4 pulls. The first two pulls we made without the "extra" sauce on the side and cooling the FMIC the car made 870 RWHP spinning the tires/clutch. Adding the 100 shot and cooling the FMIC on the last 2 pulls it made 880 RWHP also spinning the tires/clutch. So with a good dual-disc and some traction it should be in the 4 digits...Not bad for a true "street" car with A/C that I can drive anywhere I wanna go...
What clutch is in it now? 
What do you do?? Thanks Tiago...that graph shows the first pull I made blower only. Lifted early when I could feel the clutch/tire start to spin around 6000rpms...
It's a Spec 5...DD Textralia in the works!
It's a Spec 5...DD Textralia in the works!
Thread Starter
TECH Senior Member
Joined: Apr 2004
Posts: 6,955
Likes: 0
From: Houston / University of Texas, Austin
Originally Posted by DJ's99SS
Thanks Tiago...that graph shows the first pull I made blower only. Lifted early when I could feel the clutch/tire start to spin around 6000rpms...
It's a Spec 5...DD Textralia in the works!
It's a Spec 5...DD Textralia in the works!
bonesaw the spec 5.... how long was it in the car Dennis?
I need to give you a shout when i head back home... i havent seen your car running since that Midnight Fun Run we did
Originally Posted by | Powered by Satan |
bonesaw the spec 5.... how long was it in the car Dennis?
I need to give you a shout when i head back home... i havent seen your car running since that Midnight Fun Run we did
I need to give you a shout when i head back home... i havent seen your car running since that Midnight Fun Run we did
Originally Posted by DJ's99SS
LOL...brand new with about 600 break in miles then hit the streets/dyno ***** to the wall! Let me know next GTG you hit and we'll hook up...
TECH Addict
Joined: Feb 2004
Posts: 2,651
Likes: 0
From: Dallas
Originally Posted by DJ's99SS
LOL...brand new with about 600 break in miles then hit the streets/dyno ***** to the wall! Let me know next GTG you hit and we'll hook up...
badass car you have ... post some videos of you taking some Cobra's down
i got that mag. of GMHighTech of your car in it
Thread Starter
TECH Senior Member
Joined: Apr 2004
Posts: 6,955
Likes: 0
From: Houston / University of Texas, Austin
Originally Posted by raymond mckinney
Sweet car, is every car in Texas fast?
Not quite... but surprisingly there are more and more exceeding the 800 mark EASILY... and hopefully, when my car is complete, i will be in the 4 digit mark on pump gas