Kenne Bell Corvette
Administrator
Joined: Jan 2002
Posts: 45,841
Likes: 5
From: Earth
aaaaaaaahahahahahahahahaha
Well if a Cam and fast 90/90 +full bolton Z06 can keep up with a max effort kb cobra. Then a 3.3L Z06 with 30psi would be so fast that the cobra would need a telescope to view the vette.
Administrator
Joined: Jan 2002
Posts: 45,841
Likes: 5
From: Earth
What kind of nonsense is that quote in your post? No one even
said that in this thread.
...and a "max effort" 2.2L KB Cobra is good for bottom 9's.
For example:
http://lsx.streetfire.net/video/0E21...B87D56FDB9.htm
Regardless, this KB 'vette is wicked.
said that in this thread.
...and a "max effort" 2.2L KB Cobra is good for bottom 9's.
For example:
http://lsx.streetfire.net/video/0E21...B87D56FDB9.htm
Regardless, this KB 'vette is wicked.
Last edited by unit213; Apr 6, 2008 at 09:28 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I saw the thread on that thing and know it made some crazy *** power. I think the KB can be put on an fbody but a couple things have to be done to make room for it. I know that vette has a big cowl induction hood so it would fit. If it goes on a vette and you have the resources, it will fit (other than exhaust or drive train).
Sorry Unit, not bashing ya but it was talked about on that thread too about it going on an fbody, but you'd need atleast a 4" cowl so it might fit under the hood.
Anyone have any final #'s on the vette???
Sorry Unit, not bashing ya but it was talked about on that thread too about it going on an fbody, but you'd need atleast a 4" cowl so it might fit under the hood.
Anyone have any final #'s on the vette???
I saw the thread on that thing and know it made some crazy *** power. I think the KB can be put on an fbody but a couple things have to be done to make room for it. I know that vette has a big cowl induction hood so it would fit. If it goes on a vette and you have the resources, it will fit (other than exhaust or drive train).
Sorry Unit, not bashing ya but it was talked about on that thread too about it going on an fbody, but you'd need atleast a 4" cowl so it might fit under the hood.
Anyone have any final #'s on the vette???
Sorry Unit, not bashing ya but it was talked about on that thread too about it going on an fbody, but you'd need atleast a 4" cowl so it might fit under the hood.
Anyone have any final #'s on the vette???
Staging Lane
Joined: Oct 2004
Posts: 54
Likes: 0
From: conroe/woodlands, texas
I saw the thread on that thing and know it made some crazy *** power. I think the KB can be put on an fbody but a couple things have to be done to make room for it. I know that vette has a big cowl induction hood so it would fit. If it goes on a vette and you have the resources, it will fit (other than exhaust or drive train).
Sorry Unit, not bashing ya but it was talked about on that thread too about it going on an fbody, but you'd need atleast a 4" cowl so it might fit under the hood.
Anyone have any final #'s on the vette???
Sorry Unit, not bashing ya but it was talked about on that thread too about it going on an fbody, but you'd need atleast a 4" cowl so it might fit under the hood.
Anyone have any final #'s on the vette???
FormerVendor
Joined: Nov 2007
Posts: 141
Likes: 0
From: Eastern PA
thats AMERICAN_HP's car....it actually made over 800rwtq at just 2800rpms or something rediculous to that effect....sick machine but if memory serves me right he got rid of that set up and is now doin twins. run a search on his name for his specific thread about a year ago.
