sscamaro14

ECS LS3 CORVETTE - CAM ONLY 10.845 @128.58

99DROPTOPZ

iTrader: (5)

Nice runs those are really fast times for just cam only

1fastz

iTrader: (16)

Please GM put that motor in the new Camaro!!!!

sscamaro14

yea if only gm would listen to what the people wanted for once

djsanchez2

iTrader: (14)

Those are damned good 60' times!! M/T > any other DR!

That is the way to uphold the LSx reputation, keep those Cobra boys on their toes. (Freakin CAM ONLY )

sscamaro14

m/t are great tires

big reg

iTrader: (28)

The LS3 is downright insane. I am already thinking of dropping my Procharger kit and building a 383 with a 200 shot on top after seeing the numbers these LS3's are putting up.

Fabrizi

iTrader: (1)

That's just insane!!!!! Oh my, that thing is scary fast with those mods.

SIC LSX

iTrader: (10)

LS3 will be next motor in my car

99WhiteKnight

iTrader: (7)

anyone know what cam that ls3 has in it??

~LS1_TA

That's a great time. Cam only,no intake or exhaust work ?

Brad Hutchcraft

iTrader: (8)

Bad ***. I am also tossing this around as my next engine... Of course I would still be running a nasty cam...

LS1>*

iTrader: (5)

It's not just a cam...

It also has intake, headers, and 3.90 gears

Apex_632

Usually it's assumed that the owner has put the basic bolt-ons on a vehicle to go along with the cam. But even still he has VERY little done and dropped nearly 2 seconds off what you see them run stock.

LS1LT1

iTrader: (16)

True, when one says "cam only" it doesn't necessarily mean that the only mod done to the car was a cam swap, it simply means that the factory cylinder heads remain intact and untouched, all other supporting goodies are assumed to be on there.




Well I wouldn't go quite that far, stock LS3s have been running low, low 12s as of late with one allegedly hitting an 11.71 in bone stock trim but yes even an ET improvement of .9 - 1.3 seconds (and roughly 8mph) over stock is still amazing for those mods.

sciff5

iTrader: (1)

I want to know what tires hes running to be able to pull high 1.4 60's with a manual tranny. They look like MT drag radials.. which is what I was planning on using but MT suggests them only for automatic cars.

SIC LSX

iTrader: (10)

$16,000 less the na Z06 too

ndfrsd6

iTrader: (5)

i have them on my car and im runnin a 6spd and i average 1.5 60 ft its just a little tricky gettin the sweet spot to launch at ...... you just cant rev it to redline and dump like a slick .....but are great tires for the street and track

Vndcatr

iTrader: (8)

Maybe next he'll learn how to hold a burnout , or invest in a line lock ...

silver02Z

iTrader: (19)

Nice runs.. That thing is screamin...