96lt1m6 is a lying dirtbag!! BEWARE!!
#1
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jul 2009
Location: Liberal land
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
96lt1m6 is a lying dirtbag!! BEWARE!!
Bought a T56 from him about a year ago. My car was in pieces at the time so it was only installed within the past few months. Paid the SOB $1000 for the tranny, and then AFTER I pay him, he says it may need a few parts replaced. WTF, I was buying a GOOD USED TRANNY!
Anyways, he then says he is having it looked at by a local tranny guy. I wait not one, not two, but three god damn months before he FINALLY ships it to me after he had it "rebuilt." Upon getting it into the car, I immediately notice theres no reverse. Well thats just great. Now I am thinking I may have screwed up installing my $900 textralia clutch somehow and second guessing myself. After putting MAYBE 10 miles on the T56, it completely stops going into all forward gears as well.
I finally break down and rip it out and take it to a tranny shop. The guys there took the tailshaft off and a roll pin just fell out. They also said it looked like it was assembled by a 10 year old, and looks like some parts were cut to fit with a die grinder. I am rip **** at this point and am now going to be in the hole another $500-600 to have this pice of **** rebuilt like it should have been in the first place. He basically sold me a $1000 paper weight. Beware this scumbag!!!
Hope karma comes back to you buddy because it always does in the end!
Anyways, he then says he is having it looked at by a local tranny guy. I wait not one, not two, but three god damn months before he FINALLY ships it to me after he had it "rebuilt." Upon getting it into the car, I immediately notice theres no reverse. Well thats just great. Now I am thinking I may have screwed up installing my $900 textralia clutch somehow and second guessing myself. After putting MAYBE 10 miles on the T56, it completely stops going into all forward gears as well.
I finally break down and rip it out and take it to a tranny shop. The guys there took the tailshaft off and a roll pin just fell out. They also said it looked like it was assembled by a 10 year old, and looks like some parts were cut to fit with a die grinder. I am rip **** at this point and am now going to be in the hole another $500-600 to have this pice of **** rebuilt like it should have been in the first place. He basically sold me a $1000 paper weight. Beware this scumbag!!!
Hope karma comes back to you buddy because it always does in the end!