Cam install question
Cam install question Hi,
So I've been reading my 'Haynes repair manual', and it is full of good info, and giving me a good insight into many things.
It says that to remove the camshaft, I first need to remove the intake manifold and heads.
Now, I don't know my way around an engine yet, but there is no mention of removing these parts in the cam install write up that I've read on here.
Am I missing something, mabey the swap is 'easier!' than I thought?
So I've been reading my 'Haynes repair manual', and it is full of good info, and giving me a good insight into many things.
It says that to remove the camshaft, I first need to remove the intake manifold and heads.
Now, I don't know my way around an engine yet, but there is no mention of removing these parts in the cam install write up that I've read on here.
Am I missing something, mabey the swap is 'easier!' than I thought?
Have you checked out www.ls1howto.com ?
FWIW
Looked through the cam install guide there a couple of times, but the whole thing lost me a bit back then.
Since I've been reading the Haynes manual, I've gained a much better understanding of the engine as a whole (still lacking bits though).
After rereading the how2guide recently, I was surprised at how much better I understood the job, and how much '!easyer!' the whole thing sounded, (Lack of removing intake manifold and heads I guess!
).Thanks for the link and the confirmation.
Hope that all makes sense, last night was
!! 
