question about cam
Thread Starter
Staging Lane
Joined: Mar 2010
Posts: 69
Likes: 0
question about cam i own a full bolton 02 ws6 m6, wanting to drop a cam in it not looking for something huge like a ms3/4 or trex, want something like a tsp/tr/comp 22x/23x series... car is a DD with 40kmiles im looking for some nice gains so lmk what u think
Joined: Nov 2001
Posts: 34,647
Likes: 2,573
From: Schiller Park, ILL Member: #317
I am a huge fan of the TR224. It's been around since forever, has proven solid gains with or without heads, it's super easy to tune and can be daily driven without issues if you so choose.
Should get an '02 M6 car in the 375-390rwhp range with LT headers and stock heads.
Should get an '02 M6 car in the 375-390rwhp range with LT headers and stock heads.
Thread Starter
Staging Lane
Joined: Mar 2010
Posts: 69
Likes: 0
I am a huge fan of the TR224. It's been around since forever, has proven solid gains with or without heads, it's super easy to tune and can be daily driven without issues if you so choose.
Should get an '02 M6 car in the 375-390rwhp range with LT headers and stock heads.
Should get an '02 M6 car in the 375-390rwhp range with LT headers and stock heads.
keep in mind i want it to have a real nasty lope so i was thinkin 112lsa? Joined: Nov 2001
Posts: 34,647
Likes: 2,573
From: Schiller Park, ILL Member: #317
Even the 114 has a nice cammed sound, but the 112 is much more noticeable IMO. I beleive the lift is .563/.563 for either version.These specs make for a great street cam, power will be great at any rpm point and you don't have to rev the motor excessivly high to hit peak power. Also, the lift is modest enough that valvespring life will be good.
Thread Starter
Staging Lane
Joined: Mar 2010
Posts: 69
Likes: 0
u seem pretty knowledgeable there bud, im currently looking at this package here
http://www.thunderracing.com/catalog...&vid=3&pcid=51
scroll down to the second camshaft called campk-pg comes with dual valve springs,pushrods,retainers,seals for 719$ let me know what u think!
http://www.thunderracing.com/catalog...&vid=3&pcid=51
scroll down to the second camshaft called campk-pg comes with dual valve springs,pushrods,retainers,seals for 719$ let me know what u think!
Joined: Nov 2001
Posts: 34,647
Likes: 2,573
From: Schiller Park, ILL Member: #317
u seem pretty knowledgeable there bud, im currently looking at this package here
http://www.thunderracing.com/catalog...&vid=3&pcid=51
scroll down to the second camshaft called campk-pg comes with dual valve springs,pushrods,retainers,seals for 719$ let me know what u think!
http://www.thunderracing.com/catalog...&vid=3&pcid=51
scroll down to the second camshaft called campk-pg comes with dual valve springs,pushrods,retainers,seals for 719$ let me know what u think!
Depending on what you are doing and looking for out of the car, we can get you setup with a shelf cam or a custom cam if we don't have anything that will meet your goals. You're more than welcome to shoot us a PM or give us a call and go over your setup and get something setup for you.
Jon
Jon
