A/C oring replacement help
Thread Starter
Registered User
Joined: Jun 2015
Posts: 2
Likes: 0
A/C oring replacement help I have a 99 camaro with the ls1 and looked but probally didnt look hard enough, but question is where are all the orings for the a/c. Mine has a leak and was wanting to replace the orings but couldn't find a pic or diy on that. Any help would be super cool, thanks.
TECH Enthusiast
Joined: Nov 2011
Posts: 587
Likes: 12
From: Connecticut SE shore
I ordered a compressor/LP line/receiver kit a couple years ago and it came with a pile of O-rings, most of them not used for what I needed....but enough to do a complete system change out. I can count 7 connections between LP, HP, and Condenser lines. Even changing those O-rings out doesn't rule out a compressor casing/seal leak, HP sensor/cutout leak, receiver/drier weld leak, HP vent/charging connection, rubber to metal hose crimps, cracks in the condenser/evap, etc. All my O-rings were still holding pressure fine after 14 years. But what was leaking were the compressor seal and a slice in the HP tubing itself.
Last edited by Firebrian; Jun 15, 2015 at 11:52 AM.
