New member to LS1 from Kansas got a question or two.
#1
Teching In
Thread Starter
Join Date: Sep 2015
Location: Kensington, Kansas
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
New member to LS1 from Kansas got a question or two.
Ok I just got my first ls1 to put in my 70 gmc for a winter project, to give you a short rundown of what I have, It is a 5.3 bored to a 5.7, 24 x 5.7 crank, 317 heads arp head studs, ls7 lifters, ls6 springs,ls6 comp cam and pushrods, bbk fuel rails, ls1 intake. My question is he said he was building this for turbo i don't really want to go turbo because of added expense I know those are built with lower comp heads so what heads should i get to swap out for the 317's without spending a bunch to make decent power also what injector should i use, any advise would be helpful. If I posted in the wrong area I'sorry will try not to next time, new to the forum thing too.
#4
Teching In
Thread Starter
Join Date: Sep 2015
Location: Kensington, Kansas
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Cam specs
I don't really know what the specs are he didn't have the cam card I was going to pull the cam to check it out this is just a pickup that I take to car show its be not driven 3000 miles in the last 5 hrs not really wanting a real horse just something that runs good and and gets the mileage also doing 4l80e
#5
Teching In
Thread Starter
Join Date: Sep 2015
Location: Kensington, Kansas
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts