Steering column issue
Thread Starter
Teching In
Joined: Nov 2016
Posts: 6
Likes: 0
From: Prairieville La.
Steering column issue Guys I have a 03 Silverado with the steering column out, I had to cut the key switch out due to a broken off key. The new switch went back in fine, I cleaned the hole
the switch went in to make sure there was no trash in the hole. The switch won't move forward to the crank position, it's barely going into the accessory position. I get lights on the dash and it won't come out of park either, any ideas??? Any help would be greatly appreciated,
the switch went in to make sure there was no trash in the hole. The switch won't move forward to the crank position, it's barely going into the accessory position. I get lights on the dash and it won't come out of park either, any ideas??? Any help would be greatly appreciated,
Thread Starter
Teching In
Joined: Nov 2016
Posts: 6
Likes: 0
From: Prairieville La.
Yes as far as I can tell the black piece with the teeth only goes in one way and the piece with the white teeth that the black piece rotates won't move, it's an electrical component so I'm thinking it may be bad??
Thread Starter
Teching In
Joined: Nov 2016
Posts: 6
Likes: 0
From: Prairieville La.
Steering Column Issue Anyone ever replace the ignition switch on one of these because it doesn't work to make the key cylinder turn? I took the column apart to see if there was any trash in the column, and its clean, the black plastic piece with the teeth that the key cylinder turns to rotate the ignition switch only goes in one way looks like but the ignition switch wont turn when you try to rotate the key cylinder. Any help would be appreciated thanks.
