Flowfaster Exhuast
Just get a cutout welded into the I-Pipe and be done with it. That way when you want really loud you can open the cutout and when you want it a little more quiet then you can run it through the flowmaster. Cutout sounds just like the slp loudmouth I system. Also, as others have said you do have cats if the original owner only installed the catback, and if you want to get rid of them id recommend gutting them and leaving the shells of the cats for visual inspection.
Launching!
Joined: Jan 2006
Posts: 268
Likes: 0
From: South Jersey
Originally Posted by desertLS1
Im guessing you cant really make the flowmaster Exhaust too loud..if you want loud on stock manifolds, sell the Chokemaster and get the Loudmouth 1.
TECH Enthusiast
Joined: Dec 2006
Posts: 564
Likes: 1
From: Powder Springs, GA
ive got a flowmaster and cutout on mine without cats...its a little bit louder with the cutout on than normal...about the same as it was before with the cutout off w/cats... with it off its real loud...sometimes too loud... on the dyno the car lost 13hp going through the flowmaster...just some fyi
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Staging Lane
Joined: Feb 2007
Posts: 96
Likes: 0
From: Nacogdoches, TX
I like the 1 chamber flow. I had the 80 series on when I bought the car, and didnt like it at all. I got a 10 series 1 chamber because i like the chambered muffler sound, but wanted it to be as loud as it could with stock manifolds and y pipe.
Heres a clip:
http://www.youtube.com/watch?v=-w_1fIZrMFg
The muffler is mounted just before the axle, on a TSP rumbler cat back.
Heres a clip:
http://www.youtube.com/watch?v=-w_1fIZrMFg
The muffler is mounted just before the axle, on a TSP rumbler cat back.