Question for the NANO users.
Do you know where I can find the Nitro Daves suggested jets for their plate system??
You never know, it might say to use XX jets and be pretty close to what I am running now, - the 20% from the NANO on the N20 side.
You have to remember that the NX is for a nozzle and ND plate system uses different jets.. Just wanted to compare.
You never know, it might say to use XX jets and be pretty close to what I am running now, - the 20% from the NANO on the N20 side.
You have to remember that the NX is for a nozzle and ND plate system uses different jets.. Just wanted to compare.
I mean, your in the right direction, just sucks you haven't been able to dial the car in right away!!!
Good news is I'm waiting on my LS7 fuel rails and they should be hear Friday, the bad news, my brother inlaw is getting married Saturday and I don't think I could get away with skipping it!!
OK.. I need to make a correction..
In post #12 I thought those were the suggested jets for the NX Nozzle system, well its not. It the sheet that Nitro Dave's Plate system recommends.
So, here is it again.
HP N20 // Fuel
50 HP = 35 and a 22
75 HP = 41 and 28
100 = 52 and 33
150 = 62 and 38
200 = 78 and 46
So, by adding the NANO, I have to double up on the fuel.
In post #12 I thought those were the suggested jets for the NX Nozzle system, well its not. It the sheet that Nitro Dave's Plate system recommends.
So, here is it again.
HP N20 // Fuel
50 HP = 35 and a 22
75 HP = 41 and 28
100 = 52 and 33
150 = 62 and 38
200 = 78 and 46
So, by adding the NANO, I have to double up on the fuel.
